2024.11.3
Home ▸ Integrations ▸

JVC Projector

The JVC Projector integration allows for the automation of JVC Projectors.

Supported models

This integration is intended for the automation of any modern JVC Projector with a network port.

Prerequisites

JVC is requiring newer 2024+ models to use a user-generated password to access the network port for security reasons.

To set up these models:

  1. Set a password on the projector’s network setup page.
  2. Use this password when adding the JVC Projector integration in Home Assistant.

Configuration

To add the JVC Projector device to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & Services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select JVC Projector.

  • Follow the instructions on screen to complete the setup.

Remote

The JVC Projector remote platform will create a Remote entity for the device. This entity allows you to send the following commands via the remote.send_command action.

  • menu
  • up
  • down
  • left
  • right
  • ok
  • back
  • info
  • input
  • hide
  • mpc
  • cmd
  • advanced_menu
  • picture_mode
  • color_profile
  • lens_control
  • setting_memory
  • gamma_settings
  • hdmi_1
  • hdmi_2
  • mode_1
  • mode_2
  • mode_3
  • lens_ap
  • gamma
  • color_temp
  • natural
  • cinema
  • anamo
  • 3d_format

Binary sensor

The following sensor types are supported:

  • Power on is True when projector is in status “on”, “warming”

Sensor

Introduces two sensors to detect Power Status and HDMI Input.

Detailed Power Status values:

  • standby
  • on
  • warming
  • cooling
  • error

Please note that if the projector is off, it will not respond to remote polling and will show as unavailable.

Detailed HDMI Input values:

  • hdmi1
  • hdmi2

Selects

The following Select entities are added. They allow changing the device state from a list of options.

  • input